|
Other machines |
|
48 |
S7712 |
Worm grinder |
φ125×350 |
It ia special used for making precision worms. |
|
49 |
CK8935 |
NC hob relieving/ grinder lathe |
φ350×1200
Moudle:3～20 |
It is special used for making precision hobs and worms. |
|
50 |
SB6510 |
Cylindrical worm gear turning
machine |
φ150×500 |
It is used for turning cylindrical worm in automobile speed gauge or other cylindrical worms in batch production by using pinion shaped cutters with straight-tooth or |
CK8935 NC relieving lathe/grinder
1. Main advantages:
This machine is a series of small and medium specification of the hob forklift or relieving grinder machine ,it is have higher accuracy , This machine can cut all kinds of standard/non standard hob 、gear hob 、spline hob 、not only can cut the one / multi-head straightflutes hob , but also can cut the spiralflutes hob , also can cut the high precision worm .
The machine adopts overall protective shell and adopts 802D SL system of SIEMENS ,three axes ,every two axes can linkage at the same time , this system specialty is have high dependability and the good protective , this machine have the high precision digital readouts at the Z axis and have the rotatable coder at back the spindle of headstocks ,come true the close control of X and Z axes , so as to the machine have a high precision , the machine can automatic dressing the wheel by CNC axes of machine, and the machine multi-accessory ,so can cut the relieving or grinding through change the accessory .
Technical data:
Max.diameter of workpiece 350mm
Range of module to be cut 3-20mm
Max. length of workpiece 1200mm
Max. length to be cut 800mm
Max.spiral lead of workpiece arbitrary
SB6510 cylindrical worm gear turning machine
1.Application
SB6510 cylind rical worm gear turning machine is used for gear turning cylindrical worm in automobile speed gauge or other cylindrical worms in batch production by using pinion shaped cutters with straight-tooth or skewed tooth,and it is a precision machine with high efficiency for turning workpiece and it is semiautomatic cycle,and it can turning large helix angle cylindrical skewed gears (more than 60°)by using pinion shaped cutters with straight-tooth.
Principal specificarions:
Max. Dia. Of worm to be machined Ø100mm
Max. Dia.of helical gear to be machined Ø150mm
Max. modulue of helical gear to be machined 4mm
Max. Pitch of worm to be machined 15mm
Max. angle of worm helix lines 15°
Max. Length of workpiece to be machined 500mm
Max.distance between spindle to center of the tailstock 600mm
The distance between two center lines of the workpiece to cutter 30-160mm
|
